Products

Designed for aftermarket "Drag" or "Drift" spoilers. CNC machined 4mm Aluminum Composite. 14" Wide (350mm) x 18" Tall (450mm) Gloss Black Both Side...

1/2"NPT thread to 1/2" (12.7mm) hose barb fitting. Great for fitting a breather hose to our Mazda Rotary Oil Filler Necks. High quality product, fi...

1/4" NPT turbo oil feed adaptor with 40mm bolt hole centres. CNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand, and...

1/8" BSPT Pipe Plug Machined from billet 6061-T6 aluminium at our factory in Napier, NZ and anodised in our full 7 colour range.

100 series AN 30 degree hose ends, allowing you to connect 100 series braided hose to AN male fittings.

100 series AN 45 degree hose ends, allowingyou to connect 100 series braided hose to AN male fittings.

100 series AN 60 degree hose ends, allowing you to connect 100 series braided hose to AN male fittings.

100 series AN 90 degree hose ends, allowing you to connect 100 series braided hose to AN male fittings.

100 series AN straight hose ends, allowing you to connect 100 series braided hose to AN male fittings. Franklin Performance 100 series hose ends fe...

Turbo oil return 10AN adaptors with different options of bolt hole spacing. Extended length to allow easier connection of oil return line plumbing....

10AN turbo oil return adaptors to suit the front cover on Mazda FD RX7 13B (Series 6) and Mazda FC RX7 13B (Series 4 & 5), and also Cosmo engin...

10AN rocker cover fitting for Mitsubishi Lancer Evolution X engines. It is threaded to screw straight into the factory rocker cover PCV valve port,...

Push-in 10AN rocker cover fittings for Nissan RB26DETT engines. CNC Machined from billet 6061-T6 aluminium and black anodised for great looks and l...

High quality 10AN Tee Fitting Swivel on run Swivel on side Black anodised.

M18x1.5 (male) to -10AN (male) adaptor Modified M18 thread length to suit our Setrab oil coolers. Black anodised aluminium. High quality fitting.

10AN to Metric Straight Adaptor, allowing you to convert from a metric threaded port to an AN male fitting. Machined from billet 6061-T6 aluminium ...

10AN to 3/4 NPT thread to suit Nissan RB blocks for oil drain.This NPT adaptor screws directly into your RB20, RB25, RB30 block to give you an 10AN...

12AN oil drain adaptor to suit Holset T25 TurboOur oil drain adaptor is specifically designed for the Holset T25 frame to work around the compresso...

Push-in 12AN rocker cover fittings for Nissan RB26DETT engines. CNC Machined from billet 6061-T6 aluminium and black anodised for great looks and l...

PRP Coil loom to suit 13B or 20B with VR38 Coils.* Bench tested, club motorsport grade branded harness, high temp Tefzel wire and crimp joins used ...

Set of six adaptors to fit 14mm top feed injectors to RB25DE and RB25DET intake manifolds. The injector adaptors use a Viton o-ring to seal into th...

Aluminium bush to fit 17mm bore aftermarket pulleys to 15mm shaft size alternators. 15mm inside diameter 17mm outside diameter 5.5mm long CNC mac...

16AN to 16AN O-Ring Adaptor High quality black anodised 6061-T6 aluminium.

JZ Direct replacement Welch Plugs / Freeze Plugs / Expansion Plugs. These high quality Australian made plugs are used in many high performance str...