{"title":"Link Engine Management","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eLink Engine Management is a global leader in motorsport electronics and performance technology. They specialise in the development, manufacture and marketing of engine control units (ECUs) built to manage motorsport and powersport vehicles.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"link-remote-e-throttle","title":"Link Remote E-Throttle","description":"\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLink's new G4+ external E-throttle (Drive by Wire) module works with Link's G4+ Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a faster more precise throttle response. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eReplace your old mechanical throttle linkage with an advanced electronic throttle module. E-throttle is faster responding, requires less maintenance, gives you better fuel economy and lowers emissions.\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38169774424259,"sku":"RET","price":529.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/RET.1.jpg?v=1742979673"},{"product_id":"link-boost-control-solenoid-4-port","title":"Link Boost Control Solenoid (4 Port)","description":"\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4 port Boost control soldenoids are commonly used for big boost applications, boost levels can be raised as high as 6-7 times the spring pressure of the wastegate and they allow you to use lower wastegate spring pressures for more precise boost control when launching. Particularly useful in high power traction limited situations where you might want low boost in low gears and higher boost in high gears.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUp to 120PSI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with all Link ECU’s\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used with single or multiple wastegates\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFast and consistent response times\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh shifting forces\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMAC 45 series – Rugged, reliable and long operational life\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShort stroke, high flow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBalanced poppet, immune to variations of pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend starting with a PWM Frequency of 25Hz for this Boost control solenoid. A detailed description of setting up boost control can be found in the help file within the PCLink software which is available for free download.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMAC 45 series\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e120 PSI max\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\/8” BSPPL\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e12 VDC (5.4W) 18” (45cm) coil leads\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncludes 4 x 1\/8” BSP hose tail fittings for easy connection\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38169806635203,"sku":"4BCS","price":235.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/4BCS.0.jpg?v=1742979671"},{"product_id":"link-mxs-5-street-display","title":"Link MXS Strada 5\" Street Display","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLink MXS Strada 5” dash, powered by AIM.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Link MXS Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link G4+\/G4X Wire-In and Plug-in ECU's. See features tab for more information.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis listing is for the 'Street edition', please see the 'Race edition' if you are looking for a dash for motorsport purposes. This dash is also available in a 7” version.\u003c\/span\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38169816236227,"sku":"100-0168","price":2409.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/AIMDashMXSStradaStreetEdition.0.jpg?v=1742979670"},{"product_id":"copy-of-link-mxs-5-race-display","title":"Link MXS Strada 5\" Race Display","description":"\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLink MXS Strada 5\" Dash, powered by AIM.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Link MXS Strada Race Edition is a full colour, 5-inch dash display with 10 RGB shift lights and six customisable alarm LED lights. The dash is pre-configured to work with all Link G4+\/G4X Wire-In and Plugin ECU's. See features tab for more information.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis listing is for the 'Race edition', please see the 'Street edition' if you are looking for a dash for street purposes. This dash is also available in a 7” version.\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38169823576259,"sku":"100-0169","price":2409.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/AIMDashMXSStradaRaceEdition.0.jpg?v=1742979669"},{"product_id":"link-mxg-strada-7-race-display","title":"Link MXG Strada 7\" Race Display","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLink MXG Strada 7” dash, powered by AIM.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB shift lights and eight customisable alarm LED lights. The dash is pre-configured to work with all Link G4+\/G4X Wire-In and Plugin ECU's. See features tab for more information.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis listing is for the 'Race edition', please see the 'Street edition' if you are looking for a dash for street purposes. This dash is also available in a 5” version.\u003c\/span\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38169831047363,"sku":"100-0173","price":3156.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/100-0173.0.jpg?v=1742979668"},{"product_id":"link-mxg-strada-7-street-display","title":"Link MXG Strada 7\" Street Display","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLink MXG Strada 7” dash, powered by AIM.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link G4+\/G4X Wire-In and Plug-in ECU's. See features tab for more information.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis listing is for the 'Street edition', please see the 'Race edition' if you are looking for a dash for motorsport purposes. This dash is also available in a 5” version.\u003c\/span\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38169836814531,"sku":"100-0172","price":3156.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/100-0172.0.jpg?v=1742979667"},{"product_id":"link-gps-08-module","title":"Link GPS-09 Module","description":"\u003cmeta charset=\"UTF-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdd-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving technique. \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSupports more than 2000 tracks worldwide\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to set-up and review data using Race Studio 3 \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConnects to dual satellites for redundancy and precision\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSimple, plug and play connection to Strada MXS \u0026amp; MXG Dashes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA GPS module also provides the dash with a speed signal. This can be particularly useful for applications where wheel speeds are not available or utilised, such as boats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecifications\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions: 64.8 x 53.2 x 19.7 mm, Weight: 60.5 g\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eYou do not need to configure anything before going to the track: GPS09 will do it all by itself.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSatellite signal is locked very rapidly. A few seconds after switch-on, the GPS09 is ready to operate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAn average of less than one meter tolerance, which means absolute precision in determining vehicle position in curves and when the finish line is very close to another track segment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38169856999619,"sku":"100-0170","price":626.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_2023-02-11_091302292.png?v=1676059985"},{"product_id":"copy-of-link-map-sensor-5-6-bar-options","title":"Link Map Sensor (5-6.5 Bar Options)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes Plug and Pins\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMount via weld on bung, tapped hole or remote with a barb\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Link ECU","offers":[{"title":"5","offer_id":38169960218819,"sku":null,"price":437.0,"currency_code":"NZD","in_stock":true},{"title":"6.5","offer_id":38169960251587,"sku":null,"price":454.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/MAP6.5.0.jpg?v=1613391833"},{"product_id":"link-oxygen-sensor","title":"Bosch Oxygen Sensor LSU4.9","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eThis sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLink G4+\/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control. \u003c\/li\u003e\n\u003cli\u003eLink CAN-Lambda Controller – These are sold new with a sensor, so this sensor by itself is only required if you need a replacement.\u003c\/li\u003e\n\u003cli\u003eComes in your choice of 300mm long or 800mm long.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003eApplication: lambda 0.65 to ∞\u003c\/p\u003e\n\u003cp\u003eExhaust gas temperature: 930°C (1,030 for a short time)\u003c\/p\u003e\n\u003cp\u003eHexagon temperature: 600°C\u003c\/p\u003e\n\u003cp\u003eThread: M18x1.5\u003c\/p\u003e\n\u003cp\u003eWeight: 120 g\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"300mm","offer_id":39292627321027,"sku":"LSU49","price":339.25,"currency_code":"NZD","in_stock":true},{"title":"800mm","offer_id":39292627353795,"sku":"LSU50","price":339.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/LSU49.0.jpg?v=1742979664"},{"product_id":"oxygen-sensor-bung-and-plug","title":"Oxygen Sensor Bung and Plug","description":"\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eUsed to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.\u003c\/span\u003e \u003c\/div\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38170011992259,"sku":"02 B\u0026P","price":36.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/O2B_P.0.jpg?v=1742979662"},{"product_id":"cas-crank-sensor","title":"Link CAS Crank Sensor","description":"\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-pusher=\"sc-pushable-xs\" data-id=\"product-details-information-0\" data-action=\"pushable\" id=\"product-details-information-tab-0\" class=\"product-details-information-tab-content-panel active\" role=\"tabpanel\" itemprop=\"description\"\u003e\n\u003cdiv data-type=\"information-content-text\" class=\"product-details-information-tab-content-container\" id=\"product-details-information-tab-content-container-0\"\u003eUsed in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products for our trigger wheel options.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eVariable reluctance (reluctor) sensor\u003c\/li\u003e\n\u003cli\u003eIncludes Plug Kit - 2 way Bosch Style plug, terminals and boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-type=\"information-content-text-actions\" class=\"product-details-information-tab-action\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38170039845059,"sku":"CAS","price":218.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/CAS.0.jpg?v=1613392925"},{"product_id":"link-trigger-wheel-150-200mm-options","title":"Link Trigger Wheel (150-200mm Options)","description":"\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-pusher=\"sc-pushable-xs\" data-id=\"product-details-information-0\" data-action=\"pushable\" id=\"product-details-information-tab-0\" class=\"product-details-information-tab-content-panel active\" role=\"tabpanel\" itemprop=\"description\"\u003e\n\u003cdiv data-type=\"information-content-text\" class=\"product-details-information-tab-content-container\" id=\"product-details-information-tab-content-container-0\"\u003e\n\u003cdiv\u003eTWS\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 tooth\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e150mm diameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e40mm centre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTWM\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e24 tooth\u003c\/li\u003e\n\u003cli\u003e175 diameter\u003c\/li\u003e\n\u003cli\u003e40mm centre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTWL\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e60-2 tooth\u003c\/li\u003e\n\u003cli\u003e200mm diameter\u003c\/li\u003e\n\u003cli\u003e40mm centre\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Link ECU","offers":[{"title":"TWS 150mm","offer_id":38170085064899,"sku":"TWS","price":120.75,"currency_code":"NZD","in_stock":true},{"title":"TWM 175mm","offer_id":38170085097667,"sku":"TWM","price":120.75,"currency_code":"NZD","in_stock":true},{"title":"TWL 200mm","offer_id":38170085130435,"sku":"TWL","price":120.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/TWS.0.jpg?v=1613393166"},{"product_id":"link-knockblock-g4","title":"Link KnockBlock G4+","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-pusher=\"sc-pushable-xs\" data-id=\"product-details-information-0\" data-action=\"pushable\" id=\"product-details-information-tab-0\" class=\"product-details-information-tab-content-panel active\" role=\"tabpanel\"\u003e\n\u003cdiv data-type=\"information-content-text\" class=\"product-details-information-tab-content-container\" id=\"product-details-information-tab-content-container-0\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cspan\u003eThe G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air\/fuel mixtures and mechanical issues. It is used it with ear buds, headphones or noise cancelling ear muffs and features special filtering to allow you to listen in and detect knock early.  \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eListen to one or two knock sensors\u003c\/li\u003e\n\u003cli\u003eSpecial filtering design improves signal to noise ratio\u003c\/li\u003e\n\u003cli\u003eCan be used with ear-buds, headphones or noise cancelling ear muffs\u003c\/li\u003e\n\u003cli\u003eLong life lithium rechargeable battery\u003c\/li\u003e\n\u003cli\u003eRugged CNC aluminium enclosure\u003c\/li\u003e\n\u003cli\u003eFlying lead headphones connector\u003c\/li\u003e\n\u003cli\u003eCan be used with all OEM knock sensors\u003c\/li\u003e\n\u003cli\u003eCan be used to interface directly to a laptop for recording of engine noise or knock sensor frequency analysis (using PCLink G4+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePlease note headphones with their own noise filtering may be unsuitable for use with the knock block.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWhat’s in the Box?\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eG4+ KnockBlock\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 sensor looms (attached)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 headphone loom (attached)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eQuick Start Guide\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 USB cable mini\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 Bosch type doughnut OEM knock sensors\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 small Link Engine Management stickers\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eInstall the knock sensor\/s in a suitable location on the engine (typically on a solid mounting point on the block near the cylinder head)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf only using one sensor, leave the unused sensor cable disconnected\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTurn the volume control clockwise until it clicks. The LED indicator will turn blue when the KnockBlock is operating\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTurn the volume to the minimum setting (most anti-clockwise)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eConnect headphones to the 3.5mm audio jack\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRun the engine and carefully increase the volume (clockwise) until engine mechanical noise can be heard. Adjust to a comfortable listening volume\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTurn off the KnockBlock by turning the volume control anti-clockwise until it clicks\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eConnect the USB charging cable to the KnockBlock’s Mini USB connector. Can be charged from any standard USB charger PC, laptop, car or cell phone charger (2.1A at 5V max)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe LED indicator will show red while charging. When the indicator turns off the battery is fully charged\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharge the G4+ KnockBlock after use and before storage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38170101579971,"sku":"G4+KB","price":782.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/KNB.0.jpg?v=1613393494"},{"product_id":"link-knocklink-g4","title":"Link KnockLink Kit G4 Loom + Sensor","description":"\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-pusher=\"sc-pushable-xs\" data-id=\"product-details-information-0\" data-action=\"pushable\" id=\"product-details-information-tab-0\" class=\"product-details-information-tab-content-panel active\" role=\"tabpanel\" itemprop=\"description\"\u003e\n\u003cdiv data-type=\"information-content-text\" class=\"product-details-information-tab-content-container\" id=\"product-details-information-tab-content-container-0\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003eKit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe G4 KnockLink is the only detonation warning device on the market that requires no setup. Other systems require time consuming gain, frequency and noise settings to be adjusted. Without proper knock listening tools, this can prove difficult if not impossible. The KnockLink requires none of this, just wire in and start the engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEven light detonation will damage an engine over time. The G4 KnockLink's microprocessor continuously scans the knock signal and warns for any knock occurring. The engine's RPM and load is automatically 3D profiled by the KnockLink, continuously storing and dynamically adjusting this noise profile map while looking for the particular knock frequency.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperation is simple. The colour of the LED represents four different modes:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eDim Blue - KnockLink is powered, waiting for the engine to be started\u003c\/li\u003e\n\u003cli\u003eFlashing Blue - KnockLink has detected the engine has started and is now calibrating\u003c\/li\u003e\n\u003cli\u003eDim Green - KnockLink is adapting to the engine's noise profile and listening for knock\u003c\/li\u003e\n\u003cli\u003eFlashing Red - KnockLink has detected knock. Avoid large throttle openings, seek professional advice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38170111606979,"sku":"G4KNLK","price":488.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/G4KNLK.0.jpg?v=1613394170"},{"product_id":"link-knocklink-g4-1","title":"Link KnockLink G4","description":"\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-pusher=\"sc-pushable-xs\" data-id=\"product-details-information-0\" data-action=\"pushable\" id=\"product-details-information-tab-0\" class=\"product-details-information-tab-content-panel active\" role=\"tabpanel\" itemprop=\"description\"\u003e\n\u003cdiv data-type=\"information-content-text\" class=\"product-details-information-tab-content-container\" id=\"product-details-information-tab-content-container-0\"\u003e\n\u003cdiv\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eKnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock sensor to function (sold separately) or you can purchase the KnockLink Kit that includes the Knock Sensor and Loom.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe G4 KnockLink is the only detonation warning device on the market that requires no setup. Other systems require time consuming gain, frequency and noise settings to be adjusted. Without proper knock listening tools, this can prove difficult if not impossible. The KnockLink requires none of this, just wire in and start the engine.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEven light detonation will damage an engine over time. The G4 KnockLink's microprocessor continuously scans the knock signal and warns for any knock occurring. The engine's RPM and load is automatically 3D profiled by the KnockLink, continuously storing and dynamically adjusting this noise profile map while looking for the particular knock frequency.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOperation is simple. The colour of the LED represents four different modes:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDim Blue - KnockLink is powered, waiting for the engine to be started\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlashing Blue - KnockLink has detected the engine has started and is now calibrating\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDim Green - KnockLink is adapting to the engine's noise profile and listening for knock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlashing Red - KnockLink has detected knock. Avoid large throttle openings, seek professional advice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":38170133496003,"sku":"G4KNL","price":339.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/G4KNLK.1_500741f5-f466-497c-8a53-076c64af9e60.jpg?v=1613393862"},{"product_id":"link-intake-air-temp-sensor-iat1-8","title":"Link Intake Air Temp Sensor - IAT1-8","description":"\u003cspan data-mce-fragment=\"1\"\u003eLINK Air Temp Sensor (IAT1-8) 101-0045\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncludes 2-pin Deutsch DTM connector kit\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAluminium and steel weld in mounting bosses available\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\/8\" BSP Thread\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42185345597635,"sku":"IAT1-8","price":120.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_2022-10-17_195032082.png?v=1742979655"},{"product_id":"link-honda-hc20x-plug-in-ecu-ecu","title":"LINK Honda HC20X Plug-in ECU ECU","description":"\u003cstrong\u003eDesigned for the K20A engine.\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e·Please check your connector matches the header in the listed photo before purchasing.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSuitable Applications (Manual Transmission only):\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHonda Integra Type R DC5 2002-2004 with K20A\/K20A2\/K20A3\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAcura RSX 2002-2004 with K20A\/K20A2\/K20A3\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHonda Civic Type R EP3 2001-2005 with K20A\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHonda Civic Si\/SiR 2001-2005 with K20A3\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHonda Civic DX\/LX\/HX 2001-2005 with D17A1\/A2\/A3\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHonda CR-V 2002-2004 with K24A1\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eKey Features:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eReverse Lockout Control\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eElectrical Load Detection\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnboard 7 bar MAP sensor.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2x General Purpose Expansion Plugs (includes E-Throttle pins)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e16 x Auxiliary Outputs (10 of which are PWM capable).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInjector Drives 5-8 are available for Staged Injection (some rewiring required).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e10 x Digital Inputs exposed (all capable of reading frequencies up to 10kHz)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4 x Temperature Inputs (configurable pull-ups on ANT1\u0026amp;2)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e12 x 0-5V Analog Inputs\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2 x Trigger Inputs (Reluctor, Optical or Hall Sensors)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2 x CAN ports\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 Axis Accelerometer\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotorsport features – including Anti-lag, Launch Control, Flat Shifting, Traction Control\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e512MB of Internal Data Logging Memory\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42186589339843,"sku":"HC20X","price":2639.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_2022-10-18_120059928.png?v=1742979654"},{"product_id":"mazda-mx5-link-mx5nax","title":"Mazda MX5 Link - MX5NAX","description":"\u003cspan\u003eEasy to install. Affordable. Reliable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for the MX5 B6ZE(RS) \/ BP 1.8L engine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePlease check your connector matches the header in the listed photo before purchasing.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis ECU works for manual transmissions only.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIncludes onboard 4 bar or 7 bar MAP sensor\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eKnock control not available on this ECU.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMost factory features are supported\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCheck the features tab for I\/O expansion options\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSuitable applications:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1600 1989-1997 NA MX5\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1800 1989-1997 NA MX5\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1800 323 GTX\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1800 323 GTR\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePlease note: This ECU does not fit NB, NC, ND models. This unit is only suitable for the 2 plug ECU and not the later 3 plug models).\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42186589503683,"sku":"MX5NAX","price":1949.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_2022-10-18_120212510.png?v=1742979652"},{"product_id":"mazda-mx5-link-link-ecu-mx5nb1x","title":"Mazda MX5 Link LINK ECU - MX5NB1X","description":"\u003cspan\u003eMX5Link LINK - MX5NB1X\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMX5 Mazda Link ECU\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEasy to install. Affordable. Reliable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for the Pre-Facelift MX5 NB (MY1998-2000, 3 Plug ECU, non-VVT 1.8L Engine)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease check your connector matches the header in the listed photo before purchasing.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis ECU works for manual transmissions only.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIncludes onboard 7 bar MAP sensor\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMost factory features are supported\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCheck the features tab for I\/O expansion options\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42186590617795,"sku":"MX5NB1X","price":2294.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_2022-10-18_120348236.png?v=1742979651"},{"product_id":"mazda-mx5-link-link-ecu-mx5nb2x","title":"Mazda MX5 Link LINK ECU - MX5NB2X","description":"\u003cp\u003e\u003cspan\u003eMX5 LINK ECU - MX5NB2X\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eLINK ECU MAZDA MX5\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEasy to install. Affordable. Reliable.  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for the \u003c\/span\u003e\u003cspan\u003eFacelift MX5 NB\u003c\/span\u003e\u003cspan\u003e (MY2001-2005, VVT Naturally Aspirated Engines and non-VVT Mazdaspeed Turbo 1.8L)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlease check your connector matches the header in the listed photo before purchasing.  \u003c\/li\u003e\n\u003cli\u003eThis ECU works for manual transmissions only.  \u003c\/li\u003e\n\u003cli\u003eIncludes onboard 7 bar MAP sensor \u003c\/li\u003e\n\u003cli\u003eMost factory features are supported \u003c\/li\u003e\n\u003cli\u003eCheck the features tab for I\/O expansion options \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eNote: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/span\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42186591207619,"sku":"MX5NB2X","price":2294.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_2022-10-18_120428904.png?v=1742979650"},{"product_id":"link-razor-power-distribution-module-pdm-pn-135-1000","title":"Link Razor Power Distribution Module - PDM | PN 135-1000","description":"\u003cspan data-mce-fragment=\"1\"\u003e•    Can be used in conjunction with a Link ECU or as a completely standalone device\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    4 high power outputs capable of 25A continuous, PWM, high side drive, low side drive, or paired for H-bridge actuator motor control\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    8 Universal A\/D I\/O pins, capable of 8A output each or as analog or digital inputs.  Software controlled pull-ups and adjustable switching thresholds when used as inputs\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    Over-Current and Short Circuit Protection, with configurable trip and resettable fuse parameters\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    Flexible and powerful control strategies including internal general purpose PID control, math functions, logic expressions and CAN keypad functions\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    CAN keypad integration and flexible button logic, buttons can control PDM or Link ECU functions (G4X or G4+ with some limitations)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    Logging support via CAN or USB \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    Multiple PDM support - Add additional units and simply connect via CAN\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    USB Configuration via PDM Link software (Windows only)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    26 pin Superseal connector\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e•    Fully sealed CNC aluminium enclosure.\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42186592354499,"sku":"RAZOR PDM","price":1719.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_2022-10-18_120612464.png?v=1742979649"},{"product_id":"link-e-throttle-accelerator-pedal-module-ped-pn-101-0188","title":"Link E-Throttle Accelerator Pedal Module (PED) | PN 101-0188","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eE-Throttle Accelerator Pedal Module\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFirewall mounted hanging design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e16degree (~70mm) travel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRedundant dual output potentiometers suitable for use with Electronic throttle bodies\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncludes 6 pin mating connector kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eTechnical Specs:\u003c\/u\u003e\u003cbr data-mce-fragment=\"1\"\u003eFurther details on E-Throttle setup can be found in the PC Link helpfile. \u003c\/span\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42186594091203,"sku":"101-0188","price":299.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_2022-10-18_121000757.png?v=1742979648"},{"product_id":"electronic-throttle-body-kit-82mm-etb82","title":"Electronic Throttle Body Kit - 82mm (ETB82)","description":"\u003cspan data-mce-fragment=\"1\"\u003e82mm Electronic Throttle Body\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e82mm Bore size\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDual potentiometer redundancy\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBosch quality and performance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes groove on inlet port flange\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes mating connector kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eTechnical Specs:\u003c\/i\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFurther details on E-Throttle setup can be found in the PC Link helpfile.\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42186594975939,"sku":"101-0190","price":425.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_fffe891c-aa41-4bce-8591-a0b97c01005c.jpg?v=1783570863"},{"product_id":"electronic-throttle-body-kit-54mm-etb54","title":"Electronic Throttle Body Kit - 54mm (ETB54)","description":"\u003cspan\u003e54mm Electronic Throttle Body\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e54mm Bore size\u003c\/li\u003e\n\u003cli\u003eDual potentiometer redundancy\u003c\/li\u003e\n\u003cli\u003eBosch quality and performance\u003c\/li\u003e\n\u003cli\u003eIncludes groove on inlet port flange\u003c\/li\u003e\n\u003cli\u003eIncludes mating connector kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\u003ci\u003eTechnical Specs:\u003c\/i\u003e\u003cbr\u003e\u003cspan\u003eSee \u003c\/span\u003e\u003ca href=\"http:\/\/linkecu.com\/documentation\/101-0191.jpg\" target=\"_self\"\u003eattached image\u003c\/a\u003e\u003cspan\u003e. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFurther details on E-Throttle setup can be found in the PC Link helpfile.\u003c\/span\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":42186595139779,"sku":"101-0191","price":425.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_7f283ca2-858b-471c-bd3c-3c9169d29f92.jpg?v=1783570865"},{"product_id":"link-mounting-boss-iat1-8ma","title":"Link Mounting Boss (IAT1-8MA)","description":"\u003cp\u003e\u003cspan\u003eWeld in, suitable for Inlet air temperature and other sensor mounting - Aluminium\u003c\/span\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":44794397393188,"sku":null,"price":36.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/products\/image_24870721-d66c-4c5d-bb06-0513e373e8e3.jpg?v=1678340767"},{"product_id":"link-ecu-ign1a-high-powered-inductive-smart-coil-integrated-ignitor","title":"Link ECU - IGN1A - High Powered Inductive Smart Coil (Integrated Ignitor)","description":"\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eHigh Power Inductive Coil with built-in ignitor.\u003c\/p\u003e\n\u003cul style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProduce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capacitive discharge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt-in ignitor with external heat sink\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRequires HEI-type plug wire ends\/ boots. Compatible with most brands of HT lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBox Contents\u003c\/strong\u003e\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x IGN1A Smart Coil\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e1 x Mating Connector Kit\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eLink to\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/linkecu.com\/documentation\/IGN1A%20Smart%20Coil.pdf\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/linkecu.com\/documentation\/IGN1A%20Smart%20Coil.pdf\"\u003eUser Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan\u003eConnector Pinout: A – Ignition signal from ECU \u003cbr\u003eB – Logic ground, connect to ECU ground \u003cbr\u003eC – Spark wire ground, connect to cylinder head \u003cbr\u003eD – Power ground, connect to battery negative \u003cbr\u003eE – 12 volt power \u003cbr\u003e\u003cbr\u003eThe coil dwell starts when a 5 volt signal is applied to pin A and the coil fires when the voltage drops to zero. The signal is similar to an LSx coil, although it does need a bit more current to trigger. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003e\u003cspan\u003eSmart Coil specs: \u003cbr\u003eMinimum Output Voltage (no load, at recommended dwell): 40,000 volts \u003cbr\u003eMaximum Output Voltage: up to 81,000 volts (+\/- 10%) \u003cbr\u003eOutput energy: 103 mJ Spark duration: 2.9 ms \u003cbr\u003ePrimary resistance: 0.5 ohms (not directly measurable) \u003cbr\u003ePrimary inductance: 4.8 mH (not directly measurable) \u003cbr\u003eSecondary resistance: 8,500 ohms \u003cbr\u003eSecondary inductance: 22.5 H \u003cbr\u003eTurns ratio: 71.1 \u003cbr\u003eMaximum current: 19 amps \u003cbr\u003eMaximum battery voltage: 17 volts \u003cbr\u003eNominal dwell: 3.0 ms \u003cbr\u003eExcessive dwell or duty cycle may cause meltdown. \u003cbr\u003eAs with any race coil, the manufacturer does not provide a warranty\u003c\/span\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":46757716558116,"sku":"101-0291","price":166.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/image_2023-08-26_095603293.png?v=1742979643"},{"product_id":"link-ethanol-content-sensor-ecs","title":"Link Ethanol Content Sensor (ECS)","description":"\u003cp\u003e\u003cspan\u003eLooking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and Plug-In ECU’s. Uses 1 Digital input on the ECU. The sensor is fitted to the vehicle’s fuel return line anywhere between the fuel pressure regulator and the fuel tank.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAN-6 Fittings \u003c\/li\u003e\n\u003cli\u003eIncludes plug and pin kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTechnical Specs\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe pinout is indicated on the sensor itself (from left to right looking into connector on sensor) as :\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1.) Vcc (+12V supply)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2.) GND (ground)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3.) Vout (digital signal out)\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":49566208852260,"sku":"101-0034","price":373.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/image_2024-07-08_163656010.png?v=1742979642"},{"product_id":"link-g4x-subaru-wrx-v11-v12-wrx-sti-plug-in","title":"Link G4X Subaru WRX V11 \/ V12 WRX \/ STI (Plug in)","description":"\u003cp\u003e\u003cspan\u003eSubaru WRX Link ECU V11 - WRX11X\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVersion 11\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEasy to install. Affordable. Reliable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eG4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for the WRX V11 EJ20\/EJ25 Turbo (GR\/GV\/GH\/GE chassis, MY2007-2011, Denso ECU from factory). All factory functions including DCCD, hill start assist, SI drive, cruise control supported.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: Some North American models may have a Hitachi ECU which is not supported.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePlease check your connector matches the header in the listed photo before purchasing.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis ECU works for manual transmissions only.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAir temp sensor highly recommended.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMost factory features are supported.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCheck the features tab for I\/O expansion options.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/span\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":49745212506404,"sku":"238-4000","price":2869.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/image_2024-08-14_114457098.png?v=1742979641"},{"product_id":"xs-expansion-loom-xsl","title":"XS Expansion Loom (XSL)","description":"\u003cp\u003ea\u003c\/p\u003e\n\u003cdiv role=\"tabpanel\" class=\"product-details-information-tab-content-panel active\" id=\"product-details-information-tab-0\" data-action=\"pushable\" data-id=\"product-details-information-0\" data-pusher=\"sc-pushable-xs\" itemprop=\"description\"\u003e\n\u003cdiv id=\"product-details-information-tab-content-container-0\" class=\"product-details-information-tab-content-container\" data-type=\"information-content-text\"\u003e\n\u003cp\u003eWant to add additional inputs\/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is dependent on the Plugin ECU. For specific details check the plug-in ECUs specifications.\u003c\/p\u003e\n\u003cp\u003eCommon applications include but are not limited to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoost adjustment knob or switch\u003c\/li\u003e\n\u003cli\u003eWide-band AFR\/Lambda\u003c\/li\u003e\n\u003cli\u003eOil Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eInlet Air Temperature (IAT) sensor\u003c\/li\u003e\n\u003cli\u003eMap switch (Different tunes available via toggle switch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe XS Loom is 2.5m long and uses 20AWG wire.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":49825949843748,"sku":"101-0106","price":89.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_6747a688-43f0-4fd9-9e2a-479ae56e68f7.jpg?v=1783570715"},{"product_id":"link-can-gauge-oled-52mm","title":"Link CAN Gauge OLED 52mm","description":"\u003cp class=\"MsoNormal\"\u003eThe Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost pressure, air\/fuel ratio, coolant temperature, fuel pressure, ethanol content, etc. can be displayed.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe high contrast OLED display is bright for interior use and dims at night. Configure 1, 2, or 4 gauge layouts on up to 10 different pages. Pages can be scrolled through using the easy to access front buttons. Create customizable warning points, such as the coolant temperature being too high, which trigger a special warning screen and bright LED on the face of the gauge.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eEasily customize your CAN Gauge to display the data you want to see with the free to download app (compatible with Android 4.4 or later and Apple iOS). The easy-to-use app works with your smartphone or tablet to wirelessly customize your gauge in minutes and is a lot easier than trying to configure your gauge with only buttons on the front! \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBox Contents \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e1 x 52mm OLED CAN Gauge\u003cbr\u003e1 x DTM4 CAN Gauge Connection Cable\u003cbr\u003e1 x DTM4 Mating Connector Kit\u003cbr\u003e1 x Mounting Bracket\u003cbr\u003e1 x Quickstart Guide\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003e•             Displays real time data, direct from your Link ECU. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Has a high contrast OLED display, which dims at night. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Fully customisable screens, 1,2 or 4 up, on up to ten different pages. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Customisable warning screens \u0026amp; LED light for low or high warnings such as low oil pressure or high boost pressure. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Pre-configured to work with all Link G4+\/G4X\/G5 Wire-In and Plugin ECU's. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Configurable via Smart Phone with included app. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Compact 52mm (2 inch) size in high quality injection moulded housing. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Connect two or more together in a daisy chain. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Extremely easy to install and use.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e•             Compatible with Link CAN Connection Cables\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/linkecu.com\/documentation\/Can%20Gauge%20Online%20Manual.pdf\" target=\"_self\"\u003eClick here for the CAN Gauge manual.\u003c\/a\u003e\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":54005126856996,"sku":"101-0226","price":649.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_8d31028f-fe1b-46c0-8777-ac79c7af35a2.jpg?v=1783570890"},{"product_id":"can-keypad-insert-clear","title":"CAN Keypad Insert - Clear","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714833858852,"sku":"101-0240","price":5.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_9205989d-ccbb-4c74-be01-967b2317ac4a.jpg?v=1783570466"},{"product_id":"can-keypad-insert-black","title":"CAN Keypad Insert - Black","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714833957156,"sku":"101-0241","price":5.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_9fffe65b-482d-4ca8-ae15-16342788c99f.jpg?v=1783570469"},{"product_id":"wi-fi-antenna-glass-mount-3m-cable","title":"Wi-Fi Antenna Glass Mount 3m Cable","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714833989924,"sku":"101-0299","price":5.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_29fa65fa-3698-4aab-ac57-97ee609ff5fb.jpg?v=1783570471"},{"product_id":"can-keypad-insert-red","title":"CAN Keypad Insert - Red","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834022692,"sku":"101-0242","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_466b95b6-7299-418a-8008-6f1f36d6ee58.jpg?v=1783570473"},{"product_id":"can-keypad-insert-green","title":"CAN Keypad Insert - Green","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834055460,"sku":"101-0243","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_03004773-63db-41b3-9612-7d1ef03afb83.jpg?v=1783570475"},{"product_id":"can-keypad-insert-1","title":"CAN Keypad Insert - 1","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834120996,"sku":"101-0244","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_3fae9cb4-ea63-4e72-9525-b0aa19076db0.jpg?v=1783570477"},{"product_id":"can-keypad-insert-2","title":"CAN Keypad Insert - 2","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834186532,"sku":"101-0245","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_59015aec-4c9e-4539-9484-3c40d727c3e0.jpg?v=1783570480"},{"product_id":"can-keypad-insert-3","title":"CAN Keypad Insert - 3","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834252068,"sku":"101-0246","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_775782a4-e351-4136-b4c2-578b6ef8fc77.jpg?v=1783570480"},{"product_id":"can-keypad-insert-fan","title":"CAN Keypad Insert - Fan","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834284836,"sku":"101-0247","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_f12e2cc2-af40-438e-b910-c0e86920d851.jpg?v=1783570484"},{"product_id":"can-keypad-insert-pit","title":"CAN Keypad Insert - Pit","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834317604,"sku":"101-0248","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_f6744edc-2465-43e4-abd8-119112243b96.jpg?v=1783570485"},{"product_id":"can-keypad-insert-ignition","title":"CAN Keypad Insert - Ignition","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834350372,"sku":"101-0249","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_7b055514-681f-4434-93b0-4bcca0b5d588.jpg?v=1783570487"},{"product_id":"can-keypad-insert-anti-lag-system","title":"CAN Keypad Insert - Anti-Lag System","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834383140,"sku":"101-0250","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_0a5862b2-09ed-4406-9037-a4b408020621.jpg?v=1783570490"},{"product_id":"can-keypad-insert-launch","title":"CAN Keypad Insert - Launch","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834448676,"sku":"101-0251","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_9b318102-332f-4176-a703-768dc1940c4c.jpg?v=1783570492"},{"product_id":"can-keypad-insert-increase-boost","title":"CAN Keypad Insert - Increase Boost","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834514212,"sku":"101-0252","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_9e5b90d5-dc51-470f-bfca-327d61480506.jpg?v=1783570494"},{"product_id":"can-keypad-insert-decrease-boost","title":"CAN Keypad Insert - Decrease Boost","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834546980,"sku":"101-0253","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_79e7bbcc-2593-4b56-9a50-199e4e51fbe6.jpg?v=1783570496"},{"product_id":"can-keypad-insert-start","title":"CAN Keypad Insert - Start","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834710820,"sku":"101-0254","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_a340202a-1109-4db1-af2e-3810772f7814.jpg?v=1783570499"},{"product_id":"can-keypad-insert-fuel-reset","title":"CAN Keypad Insert - Fuel Reset","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834743588,"sku":"101-0255","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_6fb56611-2eff-465f-9d30-e445962602f6.jpg?v=1783570501"},{"product_id":"can-keypad-insert-nos","title":"CAN Keypad Insert - NOS","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834841892,"sku":"101-0256","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_62af859d-2c54-4c59-9f5c-60542008cf6a.jpg?v=1783570505"},{"product_id":"can-keypad-insert-boost","title":"CAN Keypad Insert - Boost","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714834940196,"sku":"101-0257","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_ea5b5d0b-b087-4e04-9ee5-1cdb2b80ca90.jpg?v=1783570508"},{"product_id":"can-keypad-insert-water-injection","title":"CAN Keypad Insert - Water Injection","description":null,"brand":"Link ECU","offers":[{"title":"Default Title","offer_id":55714835005732,"sku":"101-0258","price":8.05,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/files\/media_2d0fa764-4ce3-48b2-bc53-16663edc0bed.jpg?v=1783570512"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0540\/7644\/0771\/collections\/Link_collection.png?v=1613396267","url":"https:\/\/thrashgaragenz.com\/collections\/link-engine-management.oembed?page=11","provider":"Thrash Garage NZ","version":"1.0","type":"link"}