Aeroflow

BOOSTED 5455 1.06 Turbocharger 650HP, Natural Cast FinishExternal Wastegate, T3 Inlet Flange, V-Band Exhaust FlangeBOOSTED 5455 Turbocharger Specif...

Perfect for use with Aeroflow oil coolers, this Billet Aluminium remote filter head and thermostat combines the engine oil filter and oil thermosta...

Universal 3" (76mm) Clamp-On Polyurethane Tapered Pod Filter 8.9" (226mm) High x 6.15" (156mm) Base O.D x 4.6" (117mm) Top O.D AF2711-0810 Aeroflow...

Universal 4" (102mm) Clamp-On Polyurethane Tapered Pod Filter 5.1" (129mm) High x 5.9" (150mm) Base O.D x 4.6" (117mm) Top O.D AF2711-2520 Aeroflow...

600x300x100 mm Street Series Aluminium Intercooler, Black Finish 3" Slip On Inlet and Outlet with 2 M8x1.25mm Mounting Bosses The Aeroflow intercoo...

Single EFI Pump Surge Tank - Black Use With AF49-1014 Fuel Pump These Aeroflow Performance Surge Tanks are designed to prevent starving the fuel pu...

Turbo Stud and Nut Kit. Turbo Studs and Nuts, 5 Studs & 5 Nuts in M8 x 1.25mm. Stud Dimensions:Overall Length = 35mmUnder Head length = 8mmAbov...

Turbo Stud and Nut Kit. Turbo Studs and Nuts, 4 Studs & 4 Nuts in M10 x 1.5mm Stud Dimensions:Overall Length = 35mmUnder Head length = 8mmAbove...

Turbo Stud and Nut Kit. Turbo Studs and Nuts, 4 Studs & 4 Nuts in M10 x 1.25mm Stud Dimensions:Overall Length = 35mmUnder Head length = 8mmAbov...

Tee Piece with NPT On Run. These AN male Tee pieces feature an NPT male fitting on the run, allowing two AN lines to be run from one NPT threaded o...

AN Tee-Piece with Female on Side. This Tee-Piece features male AN fittings on either end and a female AN on the side. Various sizes available from ...

M10 Reducer to male 1/8" NPT Suit Bosch Combined Temperature and Pressure Sensor   This reducer from Aeroflow Performance has been specifically des...

Stainless Steel Banjo Bolt 3/8"-24 UNF 20mm Length Stainless Steel Banjo Bolts. Banjo bolts are sold in multiple sizes, both Metric and Imperial. W...

E85 325 LPH Hi-Flow In-Tank Pump AF49-104085.8 GPH (325 LPH) @ 29 Psi, Suit Factory HangerOutlet barb is 9.25mm or 3/8" inlet hole is 11mm or 7/16"...

Temperature Sensor 0-150°C 1/8" NPT Thread The Aeroflow Performance temperature sensor is a Negative Temperature Coefficient (NTC) thermistor senso...

The Aeroflow Performance turbo bag / blanket range provides high quality material selection, design, and construction, whilst at an affordable pric...

Dimensions/Specifications of this fan are: - Fan Blade: 304mm - Fan Mounting: 310mm- Thickness from Mounting surface to Flat Section of Motor: 50.8...

Dimensions/Specifications of this fan are: - Fan Blade: 304mm - Fan Mounting: 310mm- Thickness from Mounting surface to Flat Section of Motor: 50.8...

Dimensions/Specifications of this fan are: - Fan Blade: 356mm - Fan Mounting: 365mm- Thickness from Mounting surface to Flat Section of Motor: 50.8...

Dimensions/Specific ations of this fan are: - Fan Blade: 406mm - Fan Mounting: 415mm- Thickness from Mounting surface to Flat Section of Motor: 71....

4 Required per Fan Mounting Feet For Electric Fan. Plastic Feet slot in to Aeroflow Performance Electric fans to allow mounting of the fan to shrouds.

These AN male Tee pieces feature an NPT male fitting on the side, allowing two AN lines to be run from one NPT threaded outlet. Various sizes avail...

Model - Nissan RB20, RB25 & RB26 (single turbo conversion) turbo steampipe manifold.Turbo Collector Flange - T3 single entry.Mounting Location ...

Special order only - 1 week lead time Model - Nissan RB20, RB25 & RB26 (single turbo conversion) turbo steampipe manifold.Turbo Collector Flang...