Drivetrain

Replace your old worn factory shifter bushing and you will drastically improve the feel of your shifter. Fits CA18, SR20, RB20 and KA24 manual tra...

This is an Aftermarket Hub unit made from the highest quality parts. NTN or NSK bearings. (OEM uses NSK Bearings). Studs Included - Hub Sold indivi...

Push rod not included Suits Following Vehicles: Nissan Skyline R32 Nissan Skyline R33 (Non Turbo) Nissan Skyline R34 (Non Turbo) Nissan Silvia S13...

If you are using slip on spacers, it is recommended to change your studs to accommodate for the loss of thread on the standard studs. Wheel studs ...

  Steel slimline open ended lug nuts to suit aftermarket rims (60° taper) Specs: - Available in either M12x1.25 or M12x1.5 thread - 55mm's in lengt...

The Gktech Polyurethane Subframe Bushes are a direct replacement of the standard items and ensure that movement of the subframe is kept to a minimu...

Aftermarket rubber gearbox mount.   Nissan Silvia S13/S14/S15 Nissan Skyline R32/R33/R34 Nissan Laurel C33/C34/C35 Nissan Cefiro A31

If you are using slip on spacers, it is recommended to change your studs to accommodate for the loss of thread on the standard studs. Wheel studs ...

Clutch Release Bearing to suit Nissan RB & SR Engines *SR20 uses a semi sealed bearing which may seem larger, please note the contact patch aga...

The Gktech solid subframe bushes are a direct replacement of the standard items and ensure that movement of the subframe is kept to a minimum. They...

Steel slimline open ended lug nuts to suit aftermarket rims (60° taper) Specs: - Available in either M12x1.25 or M12x1.5 thread - 55mm's in length...

The HFM.Parts Clutch Master Cylinder is a direct replacement of the OEM Unit.Replaces factory Nissan part numbers: R33 (OEM P/N: 30610-21007) S14 (...

If you are using slip on spacers, it is recommended to change your studs to accommodate for the loss of thread on the standard studs. Wheel studs ...

*SOLD AS PAIR* Rear 5 Stud hubs.  Comes with studs pre assembled and Bearings pre assembled. Suits following models:Nissan Silvia S13 S14 S15Nissan...

The GKTECH 5 speed transmission spring kit will bring your gear stick back to life by stiffening up the shifter and increasing overall shifter feel...

These rear wheel bearings are NSK brand which Nissan uses in the manufacturing process. To suit the following vehicles: Nissan Skyline R32 RWDNissa...

The GKTECH 4 to 5 stud front conversion hubs (PAIR) are a direct replacement of the standard item, and are designed to have the standard snap ring,...

Steel slimline open ended lug nuts to suit aftermarket rims (60° taper) Specs:- Available in either M12x1.25 or M12x1.5 thread- 55mm's in length- 6...

Nissan Clutch Slave Cylinder to suit: Nissan Skyline V35 Nissan Fairlady 350Z  Also suits anybody running a CD00X Gearbox swap. Genuine Nissan OEM ...

Steel slimline open ended lug nuts to suit aftermarket rims (60° taper) Specs:- Available in either M12x1.25 or M12x1.5 thread- 55mm's in length- 6...

The Gktech handbrake cables are a direct replacement of the OEM handbrake cables for the Nissan R33 2 door coupes and can be used in the S14 and S1...

  Steel slimline open ended lug nuts to suit aftermarket rims (60° taper) Specs: - Available in either M12x1.25 or M12x1.5 thread - 55mm's in lengt...

Suits:Nissan Skyline R33 RB25DETNissan Skyline R32 GTR - Pre 93 The HFM.Parts big bore clutch slave cylinder has a 13/16 inch bore, compared to the...