Link Engine Management

50m pack of Automotive Wire (4 colours). 20m x Red10m x Black10m x Red/Green10m x Green Wire Spec: AVSS Thinwall 0.5mm² (20 AWG)

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Plug and Pin Kit only, E Plug. Includes: 1 x 26 position Superseal Connector Housing "E Plug" 26 x Superseal Terminals Gold Contact Finish “Pins” ...

G3 LinkPlus models. 74 way housing

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6Pin round CAN connector on the front of the ECU.     Compatibl...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Inc...

10m 4 Core CAN Wiring. Useful for wiring in CAN Accessories.   Four internal wires (White, Green, Red, Black) in a PVC outer jacket. Internal Wire ...

Adapter harness to run the Gen 4 front mounted under water pump Cam Sensor on the Gen 3 LS Engine.

Equivalent plug (connector) and pins as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and...

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female t...

Housing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for: G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)

Equivalent plug and pins as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required...

Housing and 26 terminals for D connector. Plug and Pin kit only.Suitable for: G4+ Thunder

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Includes housings, wedgelocks and pins. 7.5A

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V an...

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Field Installable CAN Plug - Can be used to wire in to the 6 pin CAN port on Link G4/G4+/G4X ECUs that have a round 6 pin CAN communication port. R...

Includes housings, wedgelocks and pins. 7.5A

•    Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors

Intended for use with our terminated LS engine harness. Adds Plug and play compatibility for Gen 4 LS map sensors from the base harness. ...