Can't find the correct product for your vehicle or you are unsure? Use your REGO HERE to view the DBA products that suit your vehicle and then come back here and purchase them! 

• Toyota Hilux SR & SR5 GGN15R, GGN15, KUN16R, KUN16
• Toyota Hilux Workmate KUN16R, KUN16, YGN16R, TGN16
• Toyota Hilux SR Extra Cab KUN16R KUN16
• Toyota Hilux Vigo KUN16R KUN16
  

DBA's Xtreme Performance brake pads are for drivers seeking high initial bite and friction consistency from low to high temperatures. Ideal for performance track days, 4x4's towing heavy loads including high GVM and Armoured vehicles.

Specifications:

• Semi-Metallic, Carbon fibre friction material
• G-G Class Friction. (0.45 avg mu from low to high temps)
• Excellent high temperature performance
• Optimal braking consistency up to 550c

Recommended for:

• Performance street & Police pursuit vehicles
• Club track days
• High GVM towing
• Use with all 4000 & 5000 Series DBA rotors
• DBA T3 slotted rotors for best performance

DBA Xtreme Performance part numbers are denoted by the suffix (XP).

DBA’s range of Performance brake pads have been designed at the forefront of technology and quality standards. DBA has utilized a range of cutting edge features including:

1. Chamfer – Reduces noise, vibration and harshness*
2. Slot – Facilitate temperature stability
3. Premium Quality Shim – Dual layer elastomeric coated shim
4. Scorching Process (TSP) – Raises cold friction effectiveness and reduces bedding-in time
5. Backing Plate – G3131 steel – dimensionally stable and wear resistant
6. Electronic Wear Sensor – OE replacement wear sensor**

Note: Brake Pad / Caliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable

All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimize the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time.

The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the center slot facilitates temperature stability. DBA’s brake pad backing plates are made from high quality steel that is resistant to wear.

DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products).

Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off.

As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field.