Link Sensors
Bosch Pressure / Temperature Sensor 150 psi (10 bar) 140°C
Bosch Part Number 0 261 230 340 Aeroflow Performance / Bosch Motorsport combined liquid pressure and temperature sensor is the one and only sensor ...
View full detailsLink GPS-09 Module
Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...
View full detailsLink KnockLink Kit G4 Loom + Sensor
Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning to...
View full detailsLink Trigger Wheel (150-200mm Options)
TWS 24 tooth 150mm diameter 40mm centre TWM 24 tooth 175 diameter 40mm centre TWL 60-2 tooth 200mm diameter 40mm centre
Link CAN Lambda
Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermark...
View full detailsLink KnockBlock G4+
The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures a...
View full detailsKnock Sensor with Loom
Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warn...
View full detailsLink KnockLink G4
KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock s...
View full detailsLink CAS Crank Sensor
Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel tr...
View full detailsBosch Oxygen Sensor LSU4.9
This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder...
View full detailsLink Map Sensor (1.15 - 8 Bar Options)
Includes 3-pin Deutsch DTM connector kit Easy to mount via 2 bolt holes. Note that the sensor should be mounted higher than the intake manifold p...
View full detailsLink Map Sensor (5-6.5 Bar Options)
Includes Plug and Pins Mount via weld on bung, tapped hole or remote with a barb